Skip to main content

Hexa Research is a market research and consulting organization, offering industry reports, custom research and consulting services to a host of key industries across the globe.

Increasing demand of Enhanced Oil Recovery in manufacturing and infrastructure will grow market

3 min read

Enhanced oil recovery (abbreviated EOR), also called tertiary recovery, is the extraction of crude oil from an oil field that cannot be extracted otherwise. EOR can extract 30% to 60% or more of a reservoir's oil, compared to 20% to 40% using primary and secondary recovery. According to the US Department of Energy, there are three primary techniques for EOR: thermal, gas injection, and chemical injection. More advanced, speculative EOR techniques are sometimes called quaternary recovery.

There are three primary techniques of EOR: gas injection, thermal injection, and chemical injection. Gas injection, which uses gases such as natural gas, nitrogen, or carbon dioxide (CO2), accounts for nearly 60 percent of EOR production in the United States. Thermal injection, which involves the introduction of heat, accounts for 40 percent of EOR production in the United States, with most of it occurring in California. Chemical injection, which can involve the use of long-chained molecules called polymers to increase the effectiveness of waterfloods, accounts for about one percent of EOR production in the United States. In 2013, a technique called Plasma-Pulse technology was introduced into the United States from Russia. This technique can result in another 50 percent of improvement in existing well production.

The United States has been using CO2 EOR for several decades. For over 30 years, oil fields in the Permian Basin have implemented CO2EOR using naturally sourced CO2 from New Mexico and Colorado. The Department of Energy (DOE) has estimated that full use of 'next generation' CO2-EOR in the United States could generate an additional 240 billion barrels (38 km3) of recoverable oil resources. Developing this potential would depend on the availability of commercial CO2 in large volumes, which could be made possible by widespread use of carbon capture and storage. For comparison, the total undeveloped US domestic oil resources still in the ground total more than 1 trillion barrels (160 km3), most of it remaining unrecoverable. The DOE estimates that if the EOR potential were to be fully realized, state and local treasuries would gain $280 billion in revenues from future royalties, severance taxes, and state income taxes on oil production, aside from other economic benefits.

By Hexaresearch Report The global enhanced oil recovery (EOR) market size is estimated to reach USD 55.02 billion by 2025, fueled by the increasing demand for energy in a broad range of applications including manufacturing, infrastructure and utilities. Rising number of aged wells resulting in low oil output has paved the way for advanced technologies including EOR to achieve optimum production.


Swift adoption of advanced technologies to enhance output and the presence of a large number of aged wells as compared to other regions has resulted in North America dominating the overall market with a volume share of 42.4% in 2016. A substantial amount of oil production in California and an exploration of oil sands in Canada have generated a vast opportunity for the growth of the EOR market in North America. Moreover, favorable government regions supporting E&O activities is expected to boost growth over the next few years.


Access full report or request for a free sample at:

Visceral Pain Market is driven by the increasing geriatric population globally

3 min read

When the internal organs of the body like heart, lungs, liver, pancreas, and intestines feel figurative sense something deep down and feel gut is called visceral. It occurs when you have an infection, trauma, disease, a growth, bleeding, or anything that causes pressure, inflammation, or injury to the inside or outside of your internal organs. By a research report, the main affected people from visceral pain are bipolar disorder, borderline personality disorder, and post-traumatic stress disorder patients. There are different symptoms in different people, but normal symptoms are nausea, sweating, paleness, changes in blood pressure, heart rate, and temperature.

There is OTC Medication, Prescription pain medication, Pain injections, Medical or sura gical intervention are the method by which Doctors can control and treat patients.

In OTC Medication Doctors use non-steroidal anti-inflammatories (NSAIDS) such as Aleve (naproxen) and aspirin (acetylsalicylic acid). In Prescription pain medication, opioids such as codeine and morphine will be used. Opioids can cause unpleasant side effects, including constipation and sleepiness, and they also may result in tolerance and addiction. Pain Injections is used near the area of pain, or near the nerve that transmits the pain, may be considered. This is an option only if the cause of the pain is diagnosed and any health concerns are addressed. Doctors also do surgery for high effective visceral pain patients like abdominal aortic aneurysm rupture or appendicitis, are life-threatening and require emergency surgery. Abdominal pain can also be triggered by an infection or cancer, both of which require timely diagnosis and specially tailored treatment.

By Hexaresearch Report Increasing prevalence of visceral pain and rising awareness regarding the same is projected to drive market growth over the forecast period. The global visceral pain market is expected to reach USD 14.22 billion by 2024, driven by the increasing geriatric population globally. Asia Pacific is expected to be the fastest growing region with the CAGR of 6.2%. The increase in the healthcare infrastructure and presence of a large pool of patients is projected to drive the demand for the visceral pain industry during the forecast period.

Analgesic segment dominated the market for the visceral pain with the market share of 60.4%. The major share of the analgesic segment is attributed to the increasing penetration of generic drug. Furthermore, rising healthcare expenditure and increasing use of opioids for chronic pain are the key factors attributing to its share.


In 2016, Crohn’s disease was the largest indication segment for the visceral pain market contributing to 41.4% of the market share. Increasing occurrences of Crohn’s disease across the globe coupled with the growing drug therapies for the treatment of the disease are the key factors attributing to the major share. Furthermore, increasing awareness about Crohn’s disease is fueling the demand for treatment therapies.

Access full report or request for free sample at:

Titanium Dioxide Market growth over 2024 will be USD 27.49 Billion

3 min read

Titanium dioxide, also known as titanium(IV) oxide or Titania, is the naturally occurring oxide of titanium, chemical formula TiO2. When used as a pigment, it is called titanium white, Pigment White 6 (PW6), or CI 77891. Generally, it is sourced from ilmenite, rutile, and anatase. It has a wide range of applications, including paint, sunscreen, and food coloring. When used as a food coloring, it has E number E171. Titanium dioxide occurs in nature as the well-known minerals rutile, anatase and brookite, and additionally, as two high-pressure forms, a monoclinic baddeleyite-like form and an orthorhombic α-PbO2-like form, both found recently at the Ries crater in Bavaria. One of these is known as aragonite is an extremely rare mineral. It is mainly sourced from ilmenite ore. This is the most widespread form of titanium dioxide-bearing ore around the world. Rutile is the next most abundant and contains around 98% titanium dioxide in the ore. The metastable anatase and brookite phases convert irreversibly to the equilibrium rutile phase upon heating above temperatures in the range 600–800 °C.

Titanium dioxide has eight modifications – in addition to rutile, anatase, and brookite, three metastable phases can be produced synthetically (monoclinic, tetragonal and orthorhombic), and five high-pressure forms (α-PbO2-like, baddeleyite-like, cotunnite-like, orthorhombic OI, and cubic phases) also exist.

By Hexaresearch Report The global titanium dioxide market is expected to reach USD 27.49 billion by 2024 owing to the increasing demand for titanium dioxide in paper, paint & coating, cosmetics, and plastic industries. In 2014, DuPont titanium technologies started a manufacturing facility in Alamira, Mexico having a capacity of 200,000 tons/year which will help in fulfilling the demand worldwide.

Rising demand for lightweight automobiles is expected to play a vital role in the growth of the global titanium dioxide market. Materials such as polycarbonates are used in the manufacturing of lightweight automotive which have low scratch resistance value. Also, the product is used in various industries such as chemical intermediates, fiber, technical titanium, inks for printer and rubber.

Keeping these driving factors in mind, companies are ramping up their production capacity. In 2015, PPG International entered in a partnership agreement with Henan Billions Chemicals Co. LTD. to set up a new manufacturing unit for titanium dioxide which is expected to produce 100,000 metric tons per year to expand its footprint in the Asia Pacific. Companies such as Argex Titanium are using unique patented CTL process which involves low-cost feedstock material and solvent extraction method to produce a high-quality product.

Also, companies are focusing on increasing the applications of titanium dioxide int water treatment using techniques such as photocatalysis, in which titanium dioxide is used to speed up the solar disinfection process.


A plastic industry was the second largest segment due to the increasing applications as an excellent thermal stabilizer. In 2016 plastics segment contributed 23.2% in terms of revenue and is expected to grow with a positive CAGR during the forecast period.


Access full report or request for a free sample at: 

Bioplastic Packaging Market growth over 2024 will be USD 34.24 Billion

3 min read

Bioplastics are plastics derived from renewable biomass sources, such as vegetable fats and oilscorn starchstrawwood chipsfood waste, etc. Bioplastic can be made from agricultural by-products and from used plastic bottles and other containers using microorganisms. Common plastics, such as fossil-fuel plastics (also called Petro based polymers) are derived from petroleum or natural gas. Not all bioplastics are biodegradable nor biodegrade more readily than commodity fossil-fuel derived plastics. Bioplastics are usually derived from sugar derivatives, including starchcellulose, and lactic acid.

Bioplastics are used for disposable items, such as packaging, crockery, cutlery, pots, bowls, and straws.[7] Few commercial applications exist for bioplastics. In principle they could replace many applications for petroleum-derived plastics, however, cost and performance remain problematic. As a matter of fact, their usage is favorable only if supported by specific regulations limiting the use of conventional plastics. Typical is the example of Italy, where biodegradable plastic bags and shoppers are compulsory since 2011 with the introduction of a specific law. Beyond structural materials, electroactive bioplastics are being developed that promise to be used to carry electric current. Biopolymers are available as coatings for paper rather than the more common petrochemical coatings.

By Hexaresearch Report The global bioplastic packaging market to reach USD 34.24 billion by 2024, driven by the rising consumer demand for resource efficient and eco-friendly products. Europe was the largest market accounting for 32.7% of the volume share in 2016 due to supporting regulations coupled with consumer awareness regarding the conservation of the environment. North America and the Asia Pacific followed suit, where the regions together are expected to contribute USD 3.26 billion by 2024.

Moreover, companies are focusing on R&D to expand the utilization of different raw materials such as PBS, PLA, and PBAT in various mainstream packaging applications. For instance, in April 2017, UK-based Biome Bioplastics developed a fully compostable and recyclable coffee cup made entirely from bioplastic materials. These factors together are expected to provide an impetus to the growth of the bioplastic packaging market over the next seven years.

PET dominated the global market contributing to USD 1.84 billion in 2016. The polymer was extensively used in rigid packaging on account of its high durability, transparency, and ease of moldability. Initiatives undertaken by companies such as Coca-Cola, P&G, and Heinz to use bio-based materials for packing beverages, sauces & spreads and cosmetics is expected to bolster the growth of the rigid packaging market.


Increasing demand for flexible packaging solutions on account of several benefits including size and weight particularly in food applications coupled with rising demand for biodegradable films is anticipated to boost the growth of the market. The segment is expected to grow at a volume CAGR of 20.6% from 2017 to 2024.

Access full report or request for a free sample at: 

Electronic Camera Stabilizers Market growth depends on Industrial demand

2 min read

Camera Stabilizers is a device designed to hold a camera in a manner that prevents or compensates for unwanted camera movement, such as camera shake. For little hand-held cameras, a saddle or shaped edge steadies the camera against the picture taker's body. In a few models, the camera mount is on an arm that just before the picture taker; underneath the camera is a handle hold. Another variety of positions the camera on support propped against the picture taker's chest or midriff. To make up for camera precariousness caused by the development of the administrator's body, camera administrator Garrett Brown imagined the Steadicam, a body-mounted adjustment mechanical assembly for film cameras, which utilizes springs as safeguards.

In 1991, Martin Philip Stevens (conceived in England in 1963) concocted a hand-held camera stabilizer for movie and camcorders, called the Glidecam. Some camera adjustment machines use gyrators to detect problematic movement. The Artemis Trinity framework from Arri joins a mechanical and electronic adjustment. A camera is stabilizing by shifting the weight of the camera to the Electronic shoulder. This allows for smoother shots than might be obtainable by a handheld operation. Electronic Camera Stabilizers are typically padded for comfort and allow the attachment of zoom controllers, transmitters, and other devices.

By Hexaresearch Report The global electronic camera stabilizers market is expected to reach USD 12.20 billion by 2025, registering a CAGR of 6.4% from 2017 to 2025. Demand for these products is slated to rise in the coming years owing to an increase in usage of camera stabilizers in movie and entertainment, sports, professional photography, underwater travel, and sports industries.


The movie industry is one of the largest and most lucrative categories in the global entertainment sector. The industry has been producing a number of movies annually, Hollywood being the largest contributing film industry in the world. The China film industry is one of the largest film industries globally, churning out a revenue of about USD 6.6 billion in 2016. This promising outlook of the film and entertainment industry is expected to drive the demand for electronic camera stabilizers to attain perfect shots and videos.

Access full report or request for a free sample at:


increasing prices of sugar on a global level are expected to promote Sucralose market

2 min read

Sucralose (C12H19Cl3O8) is an artificial sugar substance and used as a sweetener and It is calorie free. In Europe, it is also known as E955. It is created by chlorination of sucrose (C12H22O11). It is sweeter than normal sugar is 200 to 1000 times. It is stable under heat and over a broad range of PH condition. Therefore, it can be used in baking or in products that require a long shelf life. Sucralose is utilized in numerous nourishment and drink items since it is a no-calorie sugar does not advance dental pits, is ok for utilization by diabetics and nondiabetics, and does not influence insulin levels. Sucralose is utilized in items, for example, treat, breakfast bars and soda pops. It is likewise utilized in canned natural products wherein water and sucralose replaces a lot of higher calorie corn syrup-based added substances. Sucralose blended with maltodextrin or dextrose (both produced using corn) as building specialists are sold universally by McNeil Nutritionals under the Splenda brand name. In the United States and Canada, this mix is progressively found in eateries, in yellow parcels, as opposed to the blue bundles regularly utilized by aspartame and the pink parcels utilized by those containing saccharin sweeteners; in Canada, however, yellow parcels are likewise connected with the SugarTwin brand of cyclamate sugar.


By Hexaresearch Report The demand for sucralose is expected to grow over the forecast period on account of its positioning as an effective alternative to sugar. Sucralose is sweeter than sugar and is a cheaper substitute which does not cause dental cavities. The global sucralose market size is expected to reach USD 883.9 million by 2025. It is anticipated to expand at a CAGR of 3.0% during the forecast period. The product finds use as a tabletop sweetener during the formulation of food products including, juices, carbonated drinks, dairy products, sugar-free chewing gums, confectionery, and bakery goods.


Access full report or request for a free sample at:

Medical industry is one of the potential end-use markets of 3D Scanner

4 min read

What is 3D Scanner

It is the invention for the world of scanning where anyone can project his presence via 3D scanner. There are lot more things I can do with a 3D scanner. Mainly, a 3D scanner is a technique used to capture the shape of an object using a 3D scanner. The purpose and reason behind 3D scanning are to create a 3D model.

Types of 3D Scanner

1)      triangulation 3D scanning,

2)      Structured light 3D scanning,

3)      Photogrammetry,

4)      Contact-based 3D scanning, and

5)      Laser pulse

In triangulation 3D scanning, is used as delineated on the picture, extends a laser bar on a surface and measures the disfigurement of the laser beam. Laser triangulation 3D scanners by and large use semiconductor lasers specifically as a result of their minimal effort and their little size. They are described by a red-hued shaft. With this technique, the digitization starts with the emanation of a rectilinear laser pillar which distorts on contact with the item. Through the camera, the 3D scanner breaks down the twisting of the line transmitted by the laser on the reliefs of the article to decide, by methods for trigonometric figuring’s, its situation in space.

Structured light 3D scanning, this technology allows three-dimensional objects to be digitally reproduced. Structured light projection is typically used for small objects in comparison to laser scanners. It is often used, for example, in forensics or the digitization of our cultural objects.

Photogrammetry, it is the 3D scanning method in which the 2D photographies will convert it into 3D model. The principle of photogrammetry is to analyze several photographs of a static subject, taken from different viewpoints, and to automatically detect pixels corresponding to the same physical point. The data input required from the user is the parameters of the camera such as focal length and lens distortion.

Contact-based 3D scanning, Itis also known as digitizing. The contact technology for 3D scanning implies a contact-based form of 3D data collection. Contact 3D scanners probe the subject through physical touch, while the object is firmly held in place. A touching probe is moved on the surface to various points of the object to record 3D information. The probe is sometimes attached to an articulated arm capable of collecting all its respective configurations and angles for more precision. Some specific configurations of contact-based 3D scanners are called Coordinated Measuring Machines (CMM).

And the last, Laser pulse-based 3D scanners, also known as Time-of-Flight scanners or Lidar, measure how long a casted laser takes to hit an object and come back. Because the speed of light is exactly known, the time it takes for the laser to do the way back gives the exact distance between the 3D scanner and the object. In order to precisely measure the distance, the 3D scanner computes millions of laser pulses with picosecond accuracy.

By Hexaresearch Report, increasing adoption in healthcare industry for making customized gloves and prosthetics is expected to drive the market over the projected period. The global 3D scanner market size is projected to reach USD 3.8 billion by 2025. Medical industry is one of the potential end-use markets generating demand for high-end portable/handheld scanners as they are preferred at medical specialties.


Fast and thorough indoor and outdoor three-dimensional measurement is expected to promote product demand. Moreover, growing scope of application in the oil and gas industries for pipeline surveying is considered as one of the key growth drivers for the 3D scanner market. Constant technological developments to attain high efficiency and rising consumer awareness are expected to further drive the market.


Access full report or request for a free sample at:

Rising cases of chronic diseases are expected to have a positive impact on the omega 3 supplement market

3 min read

Omega 3 is the family of fatty acid which plays an important role in food supplement for a human body. It is made by a polyunsaturated double bond in chemical structure from a fatty acid. Ta here are three types of omega 3, alpha-linolenic acid which found in plants, second is docosahexaenoic acid which found in animal and the last one is eicosapentaenoic acid which found in algae and small insects. It can provide human beings with powerful energy through food supplement.

Omega 3 is mainly used in a cure of diseases like heart disease, stroke, depression, triglycerides, Alzheimer’s disease. These are the big diseases which will only control and takes time to cure. It can also cure and minimize eye diseases like Age-related macular degeneration, dry eye, retinitis pigmentosa.

If you think about the Side effects of omega-3 supplements are usually mild. They include unpleasant taste, bad breath, bad-smelling sweat, headache, and gastrointestinal symptoms such as heartburn, nausea, and diarrhoea. Several large studies have linked higher blood levels of long-chain omega-3s with higher risks of prostate cancer. However, other research has shown that men who frequently eat seafood have lower prostate cancer death rates and that dietary intakes of long-chain omega-3s aren’t associated with prostate cancer risk. The reason for these apparently conflicting findings is unclear. Omega-3 supplements may interact with drugs that affect blood clotting. It’s uncertain whether people with seafood allergies can safely take fish oil supplements.

By Hexaresearch Report, The market is majorly driven by exponential demand for dietary supplements from developed and developing economies. Increasing awareness regarding weight loss, balanced diet, and daily calorie monitoring are the key growth drivers. Furthermore, raising consciousness regarding the importance of omega 3 supplements owing to high prevalence of heart diseases within emerging economies such as China and India are expected to drive demand for omega 3 supplements in near future. The global omega 3 supplements market size is expected to reach a value of USD 57.06 billion by 2025. It is anticipated to expand at a CAGR of over 6.0% during the forecast period.

In India, heart diseases are one of the top causes of mortality, accounting for 1.7 million deaths in 2017, which is more than 53% from 2005. Additionally, Chronic Obstructive Pulmonary Disease (COPD) caused 848,000 deaths in 2016, up by 22.7% compared to 2005. Such an increase in the prevalence of heart diseases is expected to drive demand for dietary supplements propelling market for omega 3 supplements.

Rising cases of chronic diseases are expected to have a positive impact on the omega 3 supplement market. According to the World Health Organization (WHO), over 14 million people between the age of 30 to 70 die every year due to various chronic diseases.


The Asia Pacific is expected to emerge as the fastest growing market for omega 3 supplements. Japan is one of the largest sardine fishing countries, which is expected to propel regional growth in the near future. The region accounted for approximately 37% of market share in terms of revenue in 2016 and is expected to expand at a CAGR of over 10% by 2025. Increasing population in China and India is projected to drive regional demand for infant formulas. In addition, demand for packaged baby nutrition formulas owing to growing percentage of working women coupled with a rising disposable income of parents is anticipated to augment regional market over the forecast period.



Access full report or request for a free sample at:

Europe Fuel Card Market Growth depends on Demand of Cashless Transaction

3 min read

When a card is used as a payment card for gasoline, petrol, diesel and other fuel, is called Fuel Card. Fuel card contains vehicle number, owner card number, and amount. The first card used in the United Kingdom, where the fuel card is in a printed version after that the usability increase the card is converted into a plastic body in 1983 after in 1986 the fuel card has magnetic strip inside it for more convenient.


The fuel consumption increases day by day through the vehicle increasement. In 2018, The United States is at number 1 position with 15.8 million barrels of oil per day consumption. China is at second position with 12 million barrels of oil per day consumption. In the third position, India with 5.6 million barrels of oil per day consumption.


A fuel card is the same as your ATM card, just like you use your ATM card for withdrawal and shopping just the same as it will use for Fuel payment. You will use your card in fuel station where you can fill your vehicle fuel tank. After payment, you will get invoice message to your registered number like ATM card method. Fuel cards prevent theft; hence, they help fleet managers reduce unaccounted spending. A fuel card is accessed using the secured pin and driver is obliged to show his identity proof while using. Thus, it helps the prevention of theft in employees and is expected to drive the fuel card industry soon.


By the Hexaresearch Report, The Europe fuel card market is expected to reach USD 264.95 billion by 2024 owing to the rising demand for cashless transactions, and the availability of add-on benefits. The evolution of technologies in the payment industry has made people more inclined towards smart payment options which ensures a track on their spending as well securely. This increased need for safe and reliable digital payment is expected to drive the fuel card industry in Europe over the next few years.

Fleet managers have been looking for viable real-time solutions to ensure appropriate tracked spending. The fuel cards not only provide with the discounts and rebate, but it also comes with online reporting tools which provide fleet managers with in-depth data as to where their fuel card has been used, who used it and for what purpose. Managers also can limit the fuel card spending real time.

The universal card has penetrated the European market and fleet managers are inclined to use it due to the various benefits it offers. Branded cards from the oil companies such as ESSO, BP, and Shell are widely used and hold the second largest market share in the forecast period.

The light weight vehicle is the ones who are major users of fuel cards. However, the heavy vehicles segment is expected to grow over the forecast period owing to the increasing commercial transport.


The UK was the largest and is likely to be the fastest growing market with a CAGR of 20.7% over the forecast period. Germany will see a steady growth during the forecast period. Many big players are opting for merger and acquisition to expand their presence in the region. For instance, international players such as WEX and FLEETCOR have entered Europe by taking over ExxonMobil and Shell respectively.


Access full report or request for a free sample at:

Increasing incidences of inguinal hernia across the globe are expected to increase the demand for hernia repair products

3 min read

Hernia is the problem of intestinal exiting from the stomach muscles that become weak. In this condition, there is an enlargement in place of hernia. Some organs are present in the hollow spots inside the human body. These hollow spaces are called body cavities. Actually, the body cavity is covered with a skin membrane. When the membranes of these cavities burst sometimes, some part of the limb gets out. This distortion is called Hernia.


Hernia is more likely to be due to muscle weakness due to a lifting cough or heavy luggage for a long time. Although hernia has no special symptoms, but some people may be prone to swelling and pain. This kind of pain can increase when standing, having a muscle strain or lifting some heavy luggage.

The global hernia repair market is expected to reach USD 6.60 billion by 2024. Rigorous research & development activities, a growing number of obese patients and high susceptibility of geriatric patients to suffer from hernia are expected to drive the market over the forecast period. Increasing technological sophistication in repair devices and rigorous research and development of the drug-eluting mesh is projected to boost the demand for hernia repair devices and consumables.

Post-operative pain is growing concern post-repair with synthetic mesh. Though the cause of pain varies from patient to patient, a primary reason for pain is inflammation associated with the synthetic mesh. Other chronic illnesses related to the use of implanted mesh are abdominal pain, infection (sepsis), bowel obstruction and adhesion. In spite of increasing technological sophistication in mesh technology, synthetic materials remain the most widely used mesh products for hernia repair especially the polypropylene mesh due to their low cost and easy availability.

The biological mesh is gaining momentum in developed countries especially in the U.S. Biologic mesh development has overcome the problem associated with the synthetic mesh including foreign body interaction, chronic inflammation, infection, and stiffness. Presence of favorable reimbursement policies coupled with the well-regulated healthcare insurance and increasing prevalence of an inguinal and ventral hernia in developed economies have rendered increased acceptance of this product.

The above mentioned factors collectively boost demand for overall hernia repair consumables and surgical devices market over the forecast period. Owing to shortcomings of synthetic mesh, manufacturers are working on developing cost-effective and technological advanced mesh. For instance, Ariste Medical is developing drug-eluting mesh. These repair products are anticipated to improve the patient outcomes specifically in vascular procedures including hernia and peripheral bypass hemodialysis processes.

Also, manufacturers are focusing on developing composite or hybrid mesh. The hybrid mesh is a result of the combination of best features of biologic and synthetic mesh. Mesh that combines a minute quantity of synthetic material such as polypropylene and biologic building blocks derived from animal tissue has the property to diminish the hazards of inflammatory reactions along with providing long-term durability. Medtronic and COOK Medical are investing in the development of cost-effective composite mesh. This product may overcome the disadvantages associated with the synthetic mesh such as inflammation, sepsis and abdominal adhesion. These factors render cost advantage over the biologic mesh, which in turn is expected to boost the hernia repair market.


 Access full report or request for a free sample at: